Raypak Boiler Service and Repair in California
Service, heat exchanger work, controls repair, and safety testing on Raypak commercial boilers, from an independent company that builds boilers in California.
Code-built boilers and vessels
Code repairs and alterations
Factory-authorized Tech Center
Factory-authorized Burner Tech Center
Fifth generation, family-owned
QUICK ANSWER
McKenna Boiler Works, Inc. services and repairs Raypak boilers for plants across California. McKenna’s crews handle preventive maintenance, CSD-1 safety control testing, combustion tuning, heat exchanger cleaning and replacement, and ignition and controls repair on Raypak boilers. Code repairs are done under McKenna’s National Board R certificate. McKenna is an independent company, not affiliated with Raypak, and builds its own boilers in an ASME code shop in Oceanside, California. Call (323) 987-1816 or email info@mckennaboiler.com to schedule service.
Raypak service
Service for the Raypak boiler you already have.
Raypak is headquartered in Oxnard, California, and its copper fin-tube and condensing boilers heat hospitals, hotels, campuses, and plants across the state. Scale on the heat exchanger, worn ignition parts, and tired controls are the usual service calls.
McKenna services and repairs Raypak boilers with its own crews. We don’t sell Raypak equipment, so the recommendation is what the boiler needs: a repair, an upgrade, or a replacement when the numbers say so.
What we do
Raypak work McKenna performs.
- Preventive maintenance and CSD-1 safety control testing, with a written report
- Combustion analysis and tuning to hold efficiency and emissions
- Heat exchanger cleaning and replacement
- Ignition, flame safeguard, and controls repair
- Condensate, venting, and pump checks on condensing and multi-boiler systems
- R stamp repairs and alterations under the National Board R certificate
Raypak scope
Models
All models, including XTherm, Hi Delta, and XVers
Design
Copper fin-tube and condensing hot water boilers
Code work
National Board R certificate, repairs and alterations per the NBIC
Safety testing
ASME CSD-1 control and safety device testing where it applies
Replacement option
For boilers of 2,000,000 Btu/hr or less, McKenna has units pre-certified to South Coast AQMD Rule 1146.2
Controls
Factory controls, Autoflame, or controls from other manufacturers
Service area
All of California
Emergency
A live person answers (323) 987-1816 24/7
How it works
How a Raypak service call runs.
01
Send the nameplate
Call or use the request form. A photo of the nameplate tells us the model, size, and pressure before we arrive.
02
Inspection
A McKenna technician inspects the boiler, burner, controls, and safety devices, and notes what needs work now and what can wait.
03
Written scope
You get a written scope and quote. Code repairs list the R stamp work and the inspector hold points.
04
Repair and test
McKenna does the work, tests the safety controls, tunes the burner, and hands you the paperwork.
Why McKenna
Why plants use McKenna on their Raypak boilers.
Independent
McKenna isn’t tied to a manufacturer’s rep agreement. We recommend what fits your plant, including keeping the boiler you have.
We build boilers
McKenna engineers and builds boilers in its own ASME code shop. That’s the same knowledge we bring to your Raypak.
Code repairs in-house
McKenna holds the National Board R certificate, so welded tube repairs and other pressure part repairs don’t need another company.
One company for the boiler room
We service and repair other brands too. A plant with more than one brand of boiler gets one service company and one set of records.