Cleaver-Brooks Boiler Service and Repair in California
Service, code repairs, retubes, and ultra-low NOx retrofits on Cleaver-Brooks firetube boilers, from an independent company that builds boilers in California.
Code-built boilers and vessels
Code repairs and alterations
Factory-authorized Tech Center
Factory-authorized Burner Tech Center
Fifth generation, family-owned
QUICK ANSWER
McKenna Boiler Works, Inc. services and repairs Cleaver-Brooks boilers for industrial and commercial plants across California. McKenna’s crews handle preventive maintenance, CSD-1 safety control testing, combustion tuning, retubes, refractory, and ultra-low NOx burner retrofits on Cleaver-Brooks boilers. Code repairs are done under McKenna’s National Board R certificate. McKenna is an independent company, not affiliated with Cleaver-Brooks, and builds its own boilers in an ASME code shop in Oceanside, California. Call (323) 987-1816 or email info@mckennaboiler.com to schedule service.
Cleaver-Brooks service
Service for the Cleaver-Brooks boiler you already have.
Cleaver-Brooks firetube boilers run a lot of California’s process steam and building heat. Many have been in service for decades. They need the same things every boiler needs: annual safety testing, tuning, tube and refractory work, and a burner that meets today’s air district limits.
McKenna services and repairs Cleaver-Brooks boilers with its own crews. We don’t sell Cleaver-Brooks equipment, so the recommendation is what the boiler needs: a repair, a retrofit, or a replacement when the numbers say so.
What we do
Cleaver-Brooks work McKenna performs.
- Preventive maintenance and CSD-1 safety control testing, with a written report
- Combustion analysis and burner tuning to hold efficiency and emissions
- Retubes, tube replacement, and new tubesheets drawn by McKenna engineers
- Rear door, front door, and burner throat refractory repair
- Ultra-low NOx burner retrofits selected to meet your air district’s NOx limit
- R stamp repairs and alterations under the National Board R certificate
Cleaver-Brooks scope
Firetube models
All models, including CB, CBLE, CBEX Elite, 4WI, and ICB
Condensing models
ClearFire
Watertube models
Flextube
Pressure
Low- and high-pressure steam; hot water
Code work
National Board R certificate, repairs and alterations per the NBIC
Safety testing
ASME CSD-1 control and safety device testing where it applies
Emissions
Ultra-low NOx retrofits, as low as 2.5 ppm NOx (corrected to 3% O2) on select models
Controls
Autoflame, or controls from other manufacturers
Service area
All of California
Emergency
A live person answers (323) 987-1816 24/7
How it works
How a Cleaver-Brooks service call runs.
01
Send the nameplate
Call or use the request form. A photo of the nameplate tells us the model, size, and pressure before we arrive.
02
Inspection
A McKenna technician inspects the boiler, burner, controls, and safety devices, and notes what needs work now and what can wait.
03
Written scope
You get a written scope and quote. Code repairs list the R stamp work and the inspector hold points.
04
Repair and test
McKenna does the work, tests the safety controls, tunes the burner, and hands you the paperwork.
Why McKenna
Why plants use McKenna on their Cleaver-Brooks boilers.
Independent
McKenna isn’t tied to a manufacturer’s rep agreement. We recommend what fits your plant, including keeping the boiler you have.
We build boilers
McKenna engineers and builds firetube boilers in its own ASME code shop. That’s the same knowledge we bring to your Cleaver-Brooks.
Code repairs in-house
McKenna holds the National Board R certificate, so welded tube repairs, tubesheet work, and other pressure part repairs don’t need another company.
One company for the boiler room
We service and repair other brands too. A plant with a Cleaver-Brooks and a Parker gets one service company and one set of records.
FAQ